All of our mechanical installations now feature ProPress. A standard copper joint could take us as long as 10-15 minutes to prep and solder. Now with the ProPress System we can do a joint, 1/2" to 3" in 14 seconds! The fittings are a bit more expensive but the savings in labor hours to install far exceeds the extra cost. There will also be about 1/3 drop in the soft costs associated with any typical piping installation. No propane or map gases, no flux, brushes, solder or emery cloth...ect. We can do a complete system in ProPress from the compressor room to the distribution system with air drops! We have a few examples in the photos below.
VFD installation
ProPress dryer by-pass
ProPress air lines
ProPress water lines
Propress air lines
ProPress air and water lines
Home Page / Site Map 65 Londonderry Tpke - Hooksett, NH 03106 Toll Free (800) 698-0069
